Vmware workstation 14 pro gpu passthrough free.虚拟机 安装 CUDA 可行性说明
Since the review is taking some time because we want to be thorough, we wanted to still show off some of the major hardware changes versus the MicroServer Gen HPE did a massive hardware overhaul and some users of the MicroServer Gen8 are going to see familiar features come back. We had the older model from our HPE ProLiant MicroServer Gen10 Review , so we decided to do a teardown side-by-side to show the differences our readers need to know about.
Our review of the MicroServer Gen10 Plus will instead focus mostly on that unit instead of a side-by-side comparison, so we wanted to tell this story as well. We have a minute video talking about some of the highlights in this more comprehensive article. Of course, we are going into more detail in this article, but for those on the go who prefer to listen, or those who want to see a few more angles, we have the video version available.
If you have not already, subscribe to us on YouTube to see more content we are coming out with this year. If you are interested in a specific area, feel free to skip ahead scrolling through pictures and subheadings. That should tell you that a lot has changed, and mostly for the better. The other key feature we wanted to point out is with the two USB Type-A ports on the front of both units. Instead of one large and one small fan we see a single medium-sized fan due to the power supply, a W unit, being moved to an external DC LiteOn power brick.
This was a big upgrade that we are going to cover later. That is a nice upgrade. You can see the PCIe expansion slots have moved from vertical to horizontal.
In the Microserver Gen10 there was a x8 and an x1 low profile slot combination. These could be used for digital signage or similar applications. The VGA was a management output. The bays utilize the same tray-less mechanism and the studs used for each drive are still stored on the front of the chassis which is a feature we absolutely love since it means you do not lose them. This helps keep the unit more compact. Previous MicroServer owners may notice that there is no optical drive bay on the new Gen10 Plus.
That optical bay was often used with an extra SSD. One will notice that the Gen10 plus has an internal locking mechanism to help prevent the unwanted removal of the front bezel which keeps drives safe. You can see how the density has increased significantly.
We are showing the LiteOn W power brick because while the Gen10 Plus is about half the size of the previous Gen10, it now has a substantial external power supply which one needs to make space for.
On these side shots, you can also see the cabling impact due to not using a standard ATX power supply. One of the interesting aspects is that HPE includes a small holder for the external power supply you may have seen on the rear. Even the shipping box has a notch added to the foam insert to protect this PSU retention clip. You can see the notch on the upper left side of the foam insert in the photo above.
Moving the power supply to an external unit allowed HPE to increase the component density, clean up the cabling, and remove a fan from the assembly. The MicroServer Gen10 and Gen10 Plus have similar yet slightly different trays due to the design of the units. While the Gen10 Plus has an extra screw here, one can also remove the motherboard tray by removing three cables from one side of the chassis.
On the MicroServer Gen10 there are cables on both sides that need to be removed. Service labels help those unfamiliar with the hardware perform maintenance in the field.
This is a nice new feature that the MicroServer Gen10 does not have and one you will not see on many lower-end SMB servers either. Here are the motherboards side-by-side. What you will notice is that the Gen10 Plus motherboard is significantly denser. We wanted to point out a few key features. There is still a USB 2. We wish this could have been a USB 3 port but this is the same as the previous generation. One of the biggest changes is in networking. Technically with a PCIe x16 slot, one can even use higher-speed adapters.
As you may start to notice, the single PCIe x16 slot is great but if one wants to expand storage or networking, there is an obvious conflict. Then perhaps the most significant change with the Gen10 Plus, we now have iLO 5 included, with some caveats. This is a big change as it requires not just the iLO 5 management controller, but also DRAM and flash memory onboard to make it work which adds cost and power consumption over the Gen10 model.
But it is a huge feature. One of the major points of feedback on the Gen10 was a lack of iLO 5 which meant that organizations that invested in HPE features such as InfoSight were unable to use them to manage the MicroServers at their remote branch offices.
With the Gen10 Plus, this is possible. Standard on the unit, one gets a minimal iLO 5 experience. This is an add-on that adds a dedicated NIC to the package. One can upgrade this further to iLO Advanced and get all of the security features that the higher license level provides.
On the topic of bombshells, one may have noticed the heatsink difference. The new MicroServer Gen10 Plus has a much larger heatsink with copper heat pipes to aid in cooling. This is a huge upgrade. That means one can potentially upgrade the CPUs although the official spec sheet says only up to 71W. For those who are thinking that they can use the Pentium G with its integrated GPU to drive output, we are sorry to disappoint you.
That requires OEMs to do some extra and more costly work since Intel made some changes with this generation. As a result, the MicroServer Gen10 Plus does not have that feature. Adding iLO 5 as well as significantly higher performance CPU options means that power consumption and cost are up with this generation.
We are going to show the impacts of these in our review and compare them to the Opteron-based Gen10 system. That review has so much going into it that it is taking a lot of time but we wanted to show off some of the side-by-side hardware advancements made on the new ProLiant MicroServer Gen10 Plus in the meantime.
Inherently you assume that the captions are in the same order as the devices they are describing, but in every single photo Gen 10 is on the left, and Gen 10 Plus is on the right. I would love to see the a 19 ish rack version, short depth, dual power supply and only 2 x 2. Can we use non HP drives? Do we lose anything if we use non HP drives? Agree with everything said, if they made it 8 x 2.
Buy something cheap and if you need more CPU you can get it. Karl — noticed this that is why we put the note at the beginning of that hardware overview section that the left would always be Gen10 and the right would be Gen10 Plus. Should have photographed them swapped but that is something I realized after everything was packed and out of the studio.
Reason I ask is that having deployed a Gen8 and been really happy with it for the price point I had no qualms deploying a Gen Specifically you can set up alerts drive failure etc and successfully test them but if you then cause a failure by pulling a drive, no alert is sent.
Worse, if you plug the drive back in, you end up with two separate arrays. With this and the lack of iLO I vowed not to deploy any more…but it would be good to know if they have listened and fixed things. I dislike the fact that the psu is external, because it was a lot easyer befor to connect a hpe to a ups.
Anyone asking for this here is living in cloud cuckoo land! I am more interested in HW acceleration capabilities. Could I use the P or i. Barjasz — it is not an ordinary PCIe slot. We covered this in the full review and in the customization video. I am thinking about using it as a camera server and would like the option for live view. I think there are options at the very low-end of the Quadro line that might work.
Higher-end will likely use too much power. I like the fan noise. That is the best feature. Otherwise, no 10gbit but 4 nics without purpose.
No sata for a boot drive. Data have to be mixed with permanently fragmented system files. No M2 so have to decide whether 10gbit or nvme. Definitely no more 12w cap of opteron. I am concerned about the durability of the server as temperature of some components are very high. For illustration, here below is output of the iLO characteristic values saying that Ambient temperature is 24C but sensor BMC saying that temperature is 75C. Big comeback of hardware remote management iLO was in Gen8 not in Gen Applause for HPE that they finally understood the needs of their clients….
Save my name, email, and website in this browser for the next time I comment. Sign me up for the STH newsletter! This site uses Akismet to reduce spam. Learn how your comment data is processed. Wednesday, June 15, Sign in. Forgot your password?
virtual machine – GPU Passthrough from Windows 10 to Ubuntu on VMWare Player – Super User
I googled a lot but wasn’t able to find information how to pass a GPU in VMWare Workstation Player. All I could found was about vSphere. Every reference I’ve seen on this subject says that VMware Workstation does not currently support GPU passthrough. An Enterprise version of VMware (ESXI. I tested a few VMs (on my current host OS, Windows 10 Pro) and found that the best free one was VMware Workstation Player but it does not.
Vmware workstation 14 pro gpu passthrough free
Or it ссылка if you’re using the Pro version or Windows Server. Question feed. Or is that just not possible at all? Spice 5 Reply
vmware workstation player gpu passthrough :: 軟體兄弟 – Рекомендуемые сайты
I know there is no PCIe passthrough on Workstation Pro, BUT the same usecase (same DX11 application) performs with up to FPS (and ofc putting load on the. I set up VMWare Workstation (free) at home this weekend, and have a Windows 7 Pro VM installed. That’s all running quite well.